The production technology
Brother TC-22A-0
Technical data:
» Can reach a speed of 56 m/min in fast speed mode within 0.07 seconds. Smooth acceleration and deceleration of axes.
» Tapping at 8,000 rpm within 0.16 seconds. High-precision synchronization with chip breakage cycles and 10 times faster retraction, e.g. 800 rpm in and 8,000
rpm out.
» Spindle acceleration from 0 to 12,000 rpm and deceleration in 0.27 seconds
» 70 bar internal cooling at the tool blade, with 210 bar high-pressure pump in 0.3 seconds.
» Chip-to-chip tool change in 1.7 seconds, at n = 12,000 rpm, 26-tool magazine without limit switch or initiators
No warm-up program! Works immediately with thermal compensation, continuous correction mechanism without losing time during production!
Vision I - Sprint
Machine structure:
The VISION is a numerically controlled processing centre for the machining of wood and plastic parts as well as parts comprising compounds and aluminium.
It is a routing cutter and features a bridge portal design, enabling fully automatic countersinking, surround-milling and profile-milling.
The machine table is stationary and the tools perform all of the feed movements to the stationary workpiece. The work units are arranged next to one another
on the vertical slide; all of the unit movements are implemented within the encapsulated portal. Components are inserted from the front longitudinal side of
the machine; however, they can also be inserted from the rear.
-
KARODUR
-
Moulding plates
-
Milling
-
Pressed sheets
